CAT 0301193 SCREW for C18 Caterpillar Part - WSTPARTS
The 0301193 SCREW is a genuine and high-quality OEM replacement part compatible with Caterpillar C18, C15 and 3306 equipment. It is categorized under Bolt/Nut. Every unit is fitment-verified before dispatch. Manual reference: 3306: ELECTRICAL AND STARTING SYSTEM, group 030-1193, page 1069; 3406E: ELECTRICAL AND STARTING SYSTEM, group 141-6173, page 359.
0301193 SCREW for Caterpillar C18 — Genuine CAT & Replacement Part
WSTPARTS supplies genuine CAT and OEM-equivalent direct-replacement SCREW (Part # 0301193). Designed for CAT C18, C15, 3306, 3406E, C13, C7 equipment.
Compatible Models
Key Features
- ✔ 100% compatible with CAT C18, C15, 3306, 3406E, C13, C7
- ✔ Meets Caterpillar original quality and performance standards
- ✔ Genuine CAT lines: New Genuine / Cat Reman / Cat Classic | OEM-equivalent direct replacements
- ✔ Available for order, contact for lead time
Specifications
| Part Number (MPN) | 0301193 |
| Product Name | SCREW |
| Brand | CAT |
| Applicable Models | C18, C15, 3306, 3406E, C13, C7 |
| Weight | 0.05 kg |
| Condition | New (Genuine CAT / OEM-equivalent direct replacement) |
| Warranty | 12 Months |
Where This Part Fits
Every row below is a real listing of 0301193 in the Caterpillar parts manual: the machine it is published under, the system it belongs to, the group number and the manual page. Use it to confirm the part against your own parts book before ordering.
| Machine | System | Group No. | Manual Page |
| 3306 | ELECTRICAL AND STARTING SYSTEM | 030-1193 | p.1069 |
| 3406E | ELECTRICAL AND STARTING SYSTEM | 141-6173 | p.359 |
| C13 | ELECTRICAL AND STARTING SYSTEM | 135-6397 | p.630 |
| C15 | ELECTRICAL AND STARTING SYSTEM | 134-0603 | p.897 |
| C18 | ELECTRICAL AND STARTING SYSTEM | 134-0603 | p.500 |
| C7 | ELECTRICAL AND STARTING SYSTEM | 235-5267 | p.717 |
| 3512C | ELECTRICAL AND STARTING SYSTEM | 120-5420 | p.303 |
| 3306 | ELECTRICAL AND STARTING SYSTEM | 030-1193 | p.1070 |
System Notes — ELECTRICAL AND STARTING SYSTEM
The electrical and starting system covers the battery, starter motor, alternator, wiring harness, relays, switches and the instrument panel. It carries current from the batteries to the starter to crank the engine, and from the alternator back to keep the batteries charged. Because these machines work in dust, vibration and wide temperature swings, connectors corrode, harness insulation chafes against the frame, and starter solenoids burn out from repeated short cranks. Parts in this group are usually replaced on a symptom basis — slow cranking, a dash warning, lights that dim under load, or a no-start condition traced to an open circuit.
System Notes — GENERATORS
The generators group covers the alternator end of a generator set: stator, rotor, exciter, bearings, coupling disc, terminal box and the voltage regulation hardware. It converts engine rotation into electrical output at a held voltage and frequency. Bearing wear and insulation degradation are the two long-term concerns — a bearing that starts to rumble will eventually seize and take the rotor with it, while moisture and heat slowly break down winding insulation. Parts in this group are replaced when vibration rises, when insulation resistance falls on a megger test, or when output voltage becomes unstable under load.
FAQ
Is 0301193 the right part for my machine?
Match the part number on your old part, or send us your equipment serial number — WSTPARTS verifies fitment free of charge for CAT C18.
Genuine CAT vs direct replacement — what is the difference?
Genuine CAT covers three factory lines: New Genuine, Cat Reman (core exchange with core charge) and Cat Classic (brand-new economy line). OEM-equivalent direct replacements are non-CAT parts; grade and warranty are confirmed in the quotation.
Stock, shipping and warranty?
Lead time confirmed on request; we quote the fastest available option. Every order is covered by a warranty per quotation.
📞 Get a Quote: Contact the WSTPARTS parts team | Email: cat@wstparts.com
