247 parts in BASIC ENGINE system
| Part No. | Part Name | Qty | Page | Action |
|---|---|---|---|---|
| 033-5853 |
SEAL-O-RING
O 形密封圈 |
1 | 47 | Inquiry |
| 061-9455 |
SEAL-O-RING
O 形密封圈 |
1 | 41 | Inquiry |
| 061-9455 |
SEAL-O-RING
O 形密封圈 |
1 | 63 | Inquiry |
| 095-7424 |
RING-RETAINING <结束>
挡圈 |
1 | 54 | Inquiry |
| 099-3649 |
BOLT (M8X1.25X40-MM)
螺栓(M8X1.25X40-MM) |
11 | 58 | Inquiry |
| 0L-1026 |
PLUG-CUP
碗形塞 |
2 | 44 | Inquiry |
| 0S-0519 |
PLUG-CUP
碗形塞 |
1 | 46 | Inquiry |
| 0S-1589 |
BOLT (5/8-11X1.75 IN)
螺栓(5/8-11X1.75 IN) |
3 | 39 | Inquiry |
| 102-8802 |
KIT-RECEPTACLE (2-PIN) (插座套件(2-针))
包括插头组件和楔块 |
1 | 68 | Inquiry |
| 107-7694 |
PLATE-THRUST
止推板 |
1 | 38 | Inquiry |
| 109-9437 |
WASHER (24.5X135X12-MM THK)
垫圈(24.5X135X12–MM 厚) |
4 | 66 | Inquiry |
| 113-6069 |
PLATE-THRUST
止推板 |
1 | 61 | Inquiry |
| 115-4072 |
BEARING
轴承 |
1 | 61 | Inquiry |
| 115-4219 |
PLATE-RETAINING
挡板 |
1 | 61 | Inquiry |
| 126-1757 |
WASHER (10.85X19.3X1.27-MM THK)
垫圈 (10.85X19.3X1.27-MM 厚) |
2 | 41 | Inquiry |
| 129-7925 |
SEAL-LIP TYPE
唇形油封 |
1 | 54 | Inquiry |
| 135-9819 |
SEAL-INTEGRAL
整体式密封 |
1 | 40 | Inquiry |
| 136-0822 |
STUD
双头螺栓 |
2 | 41 | Inquiry |
| 136-4183 |
BOLT-12 POINT HEAD (M10X1.5X30MM)
12 角头螺栓 (M10X1.5X30MM) |
1 | 61 | Inquiry |
| 136-4303 |
PLUG AS-CONNECTOR (2-PIN)
电缆插头组件(2-针) |
1 | 68 | Inquiry |
| 137-3746 |
SHAFT
轴 |
1 | 54 | Inquiry |
| 137-3749 |
SPACER (45X53X10-MM THK)
间隔套(45X53X10-MM 厚) |
2 | 54 | Inquiry |
| 139-8736 |
MOUNT-FLEXIBLE
柔性安装件 |
2 | 66 | Inquiry |
| 139-8737 |
MOUNT-FLEXIBLE
柔性安装件 |
2 | 66 | Inquiry |
| 139-8873 |
SUPPORT AS
支承组件 |
4 | 66 | Inquiry |
| 144-1636 |
PIN-CONNECTOR (14-GA TO 18-GA)
电缆插脚 (14-线规至18-线规) |
2 | 68 | Inquiry |
| 148-8395 |
PLUG AS (螺塞组件)
每个包括 |
2 | 51 | Inquiry |
| 148-8408 |
PLUG AS
螺塞组件 |
1 | 71 | Inquiry |
| 151-2939 |
BEARING-MAIN (STANDARD)
主轴承(标准) |
7 | 43 | Inquiry |
| 153-1036 |
PULLEY-CRANKSHAFT
曲轴皮带轮 |
1 | 53 | Inquiry |
| 155-2270 |
KIT-CONNECTING PLUG (2-PIN) (连接插头套件 (2-针))
包括插头组件和楔块 |
1 | 68 | Inquiry |
| 160-8194 |
BEARING (CONNECTING ROD)
轴承(连杆) |
1 | 70 | Inquiry |
| 160-8197 |
BOLT
螺栓 |
2 | 70 | Inquiry |
| 160-8199 |
ROD AS
杆组件 |
1 | 70 | Inquiry |
| 161-3424 |
RING-PISTON (INTERMEDIATE)
活塞环(中间) |
1 | 70 | Inquiry |
| 163-0424 |
FLYWHEEL AS
飞轮组件 |
1 | 60 | Inquiry |
| 163-2437 |
LIFTER AS-VALVE
气门挺杆组件 |
12 | 78 | Inquiry |
| 163-2445 |
SHAFT AS-ROCKER ARM
摇臂轴组件 |
1 | 77 | Inquiry |
| 163-2447 |
ROCKER ARM AS
摇臂组件 |
1 | 74 | Inquiry |
| 163-2459 |
SPRING
弹簧 |
6 | 77 | Inquiry |
| 163-2478 |
SEAL-VALVE STEM
气门杆密封 |
12 | 51 | Inquiry |
| 164-5669 |
STAND (END)
支座(端部) |
2 | 77 | Inquiry |
| 166-1776 |
COVER AS-FRONT
前盖组件 |
1 | 41 | Inquiry |
| 166-1781 |
GASKET
密封垫 |
1 | 41 | Inquiry |
| 166-1785 |
PLATE-LIFTING
起吊板 |
1 | 65 | Inquiry |
| 166-3648 |
PIN-PISTON
活塞销 |
1 | 70 | Inquiry |
| 167-0024 |
SEAL-LINER
缸套密封 |
6 | 47 | Inquiry |
| 167-8121 |
DAMPER AS
减振器组件 |
1 | 53 | Inquiry |
| 168-7211 |
RING-PISTON (OIL CONTROL)
活塞环(机油控制) |
1 | 70 | Inquiry |
| 175-0454 |
BOLT (M16X2X160-MM)
螺栓(M16X2X160-MM) |
14 | 44 | Inquiry |
※ Parts listed per official CAT parts manual. Contact us for price and availability.
