| 零件号 | 零件名称 | 数量 | 页码 |
|---|---|---|---|
| 292-7299 |
SUPPORT AS
支承组件 |
1 | 512 |
| 282-7126 |
SUPPORT AS
支承组件 |
1 | 512 |
| 289-5565 |
TANK GP-HYDRAULIC
油箱总成 |
1 | 512 |
| 275-1362 |
BRACKET
支架 |
1 | 512 |
| 289-8194 |
FILTER GP-OIL (HYDRAULIC, CASE DRAIN)
机油滤清器总成( 泵壳体泄油) |
1 | 512 |
| 164-5567 |
COUPLER AS-QUICK DISCONNECT
快速断开连接器组件 |
1 | 512 |
| 3J-1907 |
SEAL-O-RING
O 形密封圈 |
1 | 512 |
| 6V-3965 |
COUPLER AS-QUICK DISCONNECT
快速断开连接器组件 |
1 | 512 |
| 164-5590 |
VALVE AS-FLUID SAMPLING (PILOT OIL)
液体取样阀组件(先导油) |
1 | 512 |
| 3J-7354 |
SEAL-O-RING
O 形密封圈 |
1 | 512 |
| 8C-3446 |
VALVE-FLUID SAMPLING
液体取样阀 |
1 | 512 |
| 188-4140 |
FILTER GP-OIL (HYDRAULIC RETURN) ) (
机油滤清器总成 回油 |
1 | 512 |
| 8T-7971 |
WASHER-HARD (13.5X25.5X5-MM THK) ) (13.5X25.5X5-MM
硬垫圈 厚 |
2 | 512 |
| 6J-2680 |
SEAL-O-RING
O 形密封圈 |
1 | 512 |
| 6V-0852 |
CAP-DUST
防尘罩 |
1 | 512 |
| 8C-3451 |
CAP-DUST
防尘罩 |
1 | 512 |
| 8T-4121 |
WASHER-HARD (11X21X2.5-MM THK)
硬垫圈 (11X21X2.5-MM 厚) |
7 | 512 |
| 8T-4136 |
BOLT (M10X1.5X25-MM)
螺栓(M10X1.5X25-MM) |
3 | 512 |
| 8T-4183 |
BOLT (M12X1.75X40-MM)
螺栓(M12X1.75X40-MM) |
2 | 512 |
| 8T-4192 |
BOLT (M12X1.75X25-MM)
螺栓(M12X1.75X25-MM) |
2 | 512 |
| 8T-4195 |
BOLT (M10X1.5X30-MM)
螺栓(M10X1.5X30-MM) |
4 | 512 |
| 8T-4223 |
WASHER-HARD (13.5X25.5X3-MM THK) ) (13.5X25.5X3-MM
硬垫圈 厚 |
6 | 512 |
| 8T-4224 |
WASHER-HARD (8.8X16X2-MM THK)
硬垫圈 (8.8X16X2–MM 厚) |
4 | 512 |
| 8T-4908 |
BOLT (M8X1.25X25-MM)
螺栓(M8X1.25X25-MM) |
4 | 512 |
| 8T-4956 |
BOLT (M12X1.75X35-MM)
螺栓(M12X1.75X35-MM) |
4 | 512 |
