| Part No. | Name | Qty | Page |
|---|---|---|---|
| 7E-8070 |
FILM (INFORMATION) INSTALL ON LEFT HAND SIDE OF ENGINE ON 2ND FLAT SLANTED SURFACE FROM THE REAR OF ENGINE ON REAR VALVE COVER BASE.
|
1 | 1045 |
| 8N-7043 |
FILM (OIL FILTER DUPLEX VALVE)
|
1 | 1045 |
| 178-0480 |
FILM GP RH SERVICE ENGINE, INSTALL ON TOP OF ENGINE OIL COOLER. LH SERVICE ENGINE, INSTALL ON LH SIDE OF VALVE MECHANISM BASE
|
1 | 1045 |
| 8N-7045 |
FILM-DUPLEX VALVE (FUEL FILTER, LH)
|
1 | 1045 |
| 8C-8902 |
FILM-IDENTIFICATION (ENGINE OIL FILTER) INSTALL ON SPIN ON OIL FILTER
|
2 | 1045 |
| 114-5988 |
FILM-IDENTIFICATION (FUEL FILTER) INSTALL ON SPIN-ON FUEL FILTER
|
1 | 1045 |
| 7E-2700 |
FILM-INFORMATION (LIFT EYE LOCATION) INSTALL ON INSIDE SURFACE OF LIFTING EYES, JUST BELOW EYES.
|
2 | 1045 |
| 224-8945 |
FILM-WARNING (DO NOT USE ETHER, U.S)
|
1 | 1045 |
| 225-4256 |
FILM-WARNING (HOT FLUID UNDER PRESSURE, U.S.)
|
1 | 1045 |
| 228-3581 |
FILM-WARNING (DO NOT OPERATE, READ OMM)
|
1 | 1045 |
| 115-5852 |
PLATE & FILM GP (ENGINE INFORMATION) RH SERVICE ENGINE, INSTALL ON TOP OF ENGINE OIL COOLER. LH SERVICE ENGINE, INSTALL ON LH SIDE OF VALVE MECHANISM BASE
|
2 | 1045 |
| 300-0572 |
PLATE-IDENTIFICATION (CAT C18 ACERT)
|
1 | 1045 |
| 7E-2681 |
PLATE-IDENTIFICATION (CATERPILLAR) INSTALL IN CENTER OF FRONT VALVE COVER
|
1 | 1045 |
| 3N-3790 |
PLATE-SERIAL NUMBER (ENGINE)
|
1 | 1045 |
| 8L-8413 |
STRAP-CABLE INSTALL PRESTART TAG
|
2 | 1045 |
| 3N-3469 |
TAG-INSTRUCTION (ENGINE PRESTART) INSTALL ON RH OR LH SIDE ENGINE IN A VISIBLE LOCATION. DO NOT INSTALL ON FRONT OR REAR OF ENGINE OR COMPONENT.
|
1 | 1045 |
