| Part No. | Name | Qty | Page |
|---|---|---|---|
| 115-7942 |
TIMER
|
3 | 260 |
| 308-9787 |
LAMP-INDICATOR (MONOLITHIC-GREEN)
|
2 | 260 |
| 127-8156 |
BRACKET-MOUNTING
|
3 | 260 |
| 198-4263 |
FILM-INFORMATION
|
1 | 260 |
| 325-9712 |
BOX GP-ELECTRONIC
|
1 | 260 |
| 7W-3055 |
FILM-INFORMATION INSTALL APPROPRIATE IDENTIFICATION NUMBER OVER CORRESPONDING NUMBERS FOR LINES GROUPS.
|
1 | 261 |
| 9Y-9775 |
FILM-INFORMATION (OPEN, MECHANICAL ROTATE) INSTALL ONE ON EACH PUSH ROD COMPARTMENT COVER NEAR CYLINDER PRESSURE VALVE LOCATED IN THE CYLINDER HEAD
|
16 | 261 |
| 7W-5890 |
FILM-ROTATION (STANDARD ROTATION) INSTALL ON TOP OF FLYWHEEL HOUSING. IF HOUSING NOT AVAILABLE INSTALL ON REAR CAM GEAR COVER.
|
1 | 261 |
| 7W-9787 |
FILM-SERVICE PROCEDURE RH SERVICE -- INSTALL ON RH SIDE OF ENGINE ON END OF UPPER DUPLEX FUEL FILTER GROUP LH SERVICE -- INSTALL ON LH SIDE OF ENGINE ON END OF UPPER DUPLEX FUEL FILTER GROUP
|
1 | 261 |
| 1H-4950 |
FILM-WARNING (CRANKCASE) INSTALL ONE ON UPPER PORTION OF 2ND RH REAR CRANKSHAFT COVER FROM REAR OF ENGINE. INSTALL ONE ON UPPER PORTION OF 2ND LH CRANKCASE COVER FROM FRONT OF ENGINE.
|
2 | 261 |
| 7E-2681 |
PLATE-IDENTIFICATION (CATERPILLAR) INSTALL ONE ON LH AND RH SIDE OF ENGINE ON SECOND CAMSHAFT COVER FROM REAR OF ENGINE CYLINDERS #13 AND #14
|
2 | 261 |
| 179-0161 |
PLATE-INFORMATION INSTALL BETWEEN FIRST AND SECOND REAR, RH CRANKCASE COVER
|
1 | 261 |
| 4B-4158 |
SCREW-DRIVE (NO 4X0.25-IN) FOR USE WITH 3N3790.
|
2 | 261 |
