| Part No. | Name | Qty | Page |
|---|---|---|---|
| 8L-9765 |
FILM-FUEL RETURN (EXCESS) ON FUEL RETURN VALVE, OR THE FUEL FILTER HOUSING.
|
1 | 399 |
| 225-4256 |
FILM-WARNING (HOT FLUID UNDER PRESSURE, U.S.) ON THE TOP OF THE EXPANSION TANK, CENTERED WITH THE FILL CAP ON THE RIGHT SIDE.
|
1 | 399 |
| 228-3581 |
FILM-WARNING (READ OMM) ONE FILM EACH ON CYL #1 AND #2 VALVE COVER BASE, OR THE NEXT VISIBLE VALVE COVER BASE.
|
2 | 399 |
| 225-3226 |
FILM-WARNING (HOT SURFACE) ONE FILM EACH ON THE VALVE COVERS FOR CYL #5 AND #6. IF EITHER OF THESE COVERS ARE NOT AVAILABLE, MOVE FILM TO THE NEXT AVAILABLE VALVE COVER NEAREST TO THE TURBOCHARGER, FROM THE SIDE OF THE ENGINE.
|
2 | 399 |
| 115-5852 |
PLATE & FILM GP (ENGINE) ON LH, FRONT, LOWER HEAD FACE OF THE BLOCK BETWEEN CYL #2 AND THE FRONT HOUSING, READABLE FROM THE REAR OF ENGINE.
|
1 | 399 |
| 7E-2681 |
PLATE-IDENTIFICATION (CATERPILLAR) ONE PLATE ON RH REAR CAM COVER AND ONE PLATE ON LH FRONT CAM COVER, IF VISIBLE. IF EITHER PRIMARY LOCATION IS NOT VISIBLE, INSTALL PLATE ON THE NEXT VISIBLE CAM COVER LOCATION ON THAT SIDE OF THE ENGINE.
|
2 | 399 |
| 3N-3790 |
PLATE-SERIAL NUMBER (ENGINE) ON LH SIDE OF BLOCK, NEAR REAR FACE ON CAMSHAFT COMPARTMENT, USING 4B-4158 DRIVE SCREWS.
|
1 | 399 |
| 4B-4158 |
SCREW-DRIVE (3/16X0.25-IN)
|
2 | 399 |
